Moxa UC-7112 UC-7112-LX PLUS Manuale Utente
Codici prodotto
UC-7112-LX PLUS
2
w w w. m o x a . c o m
i n f o @ m o x a . c o m
Embedded Computing Solutions
Dimensions
Hardware Specifications
21.3
47.3
77 (3.03")
unit =mm(inch)
(0.8")
11
1
(4
.3
1"
)
(1.56")
26
.0
(1
.0
2"
)
4
100 (4.18")
8 3
6
(0.24")
(0.16")
7
(0.28")
25
(0
.9
8"
)
12
.5
(0
.4
9"
)
P1
P2
TX
RX
P1
P2
TX
RX
Ready
V+ RESET
12-48V
LAN1
RS-232/422/485
LAN2
88 (3.46")
Computer
CPU: MOXA ART ARM9 32-bit RISC CPU, 192 MHz
OS (pre-installed): µClinux or Linux
DRAM:
UC-7110/UC-7112: 16 MB
UC-7112 Plus: 32 MB onboard
Flash:
UC-7110/UC-7112: 8 MB onboard
UC-7112 Plus: 16 MB onboard
OS (pre-installed): µClinux or Linux
DRAM:
UC-7110/UC-7112: 16 MB
UC-7112 Plus: 32 MB onboard
Flash:
UC-7110/UC-7112: 8 MB onboard
UC-7112 Plus: 16 MB onboard
Storage
Storage Expansion: SD slot (UC-7112 and UC-7112 Plus only)
Ethernet Interface
LAN: 2 auto-sensing 10/100 Mbps ports (RJ45)
Magnetic Isolation Protection: 1.5 KV built-in
Magnetic Isolation Protection: 1.5 KV built-in
Serial Interface
Serial Standards: 2 RS-232/422/485 ports, software-selectable (DB9
male)
ESD Protection: 15 KV for all signals
Console Port: RS-232, 3-wire (TxD, RxD, GND), pin-header
male)
ESD Protection: 15 KV for all signals
Console Port: RS-232, 3-wire (TxD, RxD, GND), pin-header
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, XON/XOFF, ADDC® (automatic data
direction control) for RS-485
Baudrate: 50 bps to 921.6 Kbps (supports non-standard baudrates;
see user’s manual for details)
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, XON/XOFF, ADDC® (automatic data
direction control) for RS-485
Baudrate: 50 bps to 921.6 Kbps (supports non-standard baudrates;
see user’s manual for details)
Serial Signals
RS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w: Data+, Data-, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w: Data+, Data-, GND
LEDs
System: OS Ready
LAN: 10M/Link x 2, 100M/Link x 2 (on connector)
Serial: TxD x 2, RxD x 2
LAN: 10M/Link x 2, 100M/Link x 2 (on connector)
Serial: TxD x 2, RxD x 2
Physical Characteristics
Housing: Aluminum (1 mm)
Weight: 190 g
Dimensions: 77 x 111 x 26 mm (3.03 x 4.37 x 1.02 in)
Mounting: DIN-Rail, wall
Weight: 190 g
Dimensions: 77 x 111 x 26 mm (3.03 x 4.37 x 1.02 in)
Mounting: DIN-Rail, wall
Environmental Limits
Operating Temperature:
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Operating Humidity: 5 to 95% RH
Storage Temperature:
Standard Models: -20 to 80°C (-4 to 176°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Anti-Vibration: 1 g @ IEC-68-2-6, sine wave (resonance search),
5-500 Hz, 1 Oct/min, 1 cycle, 13 min 17 sec per axis (UC-7110 only)
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Operating Humidity: 5 to 95% RH
Storage Temperature:
Standard Models: -20 to 80°C (-4 to 176°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Anti-Vibration: 1 g @ IEC-68-2-6, sine wave (resonance search),
5-500 Hz, 1 Oct/min, 1 cycle, 13 min 17 sec per axis (UC-7110 only)
Power Requirements
Input Voltage: 12 to 48 VDC
Power Consumption: 4.5 W
• 170 mA @ 24 VDC
• 340 mA @ 12 VDC
Power Consumption: 4.5 W
• 170 mA @ 24 VDC
• 340 mA @ 12 VDC
Regulatory Approvals
EMC: CE (EN55022 Class A, EN61000-3-2 Class A, EN61000-3-3,
EN55024), FCC (Part 15 Subpart B, CISPR 22 Class A)
Safety: UL/cUL (UL60950-1, CSA C22.2 No. 60950-1-03), TÜV
(EN60950-1)
EN55024), FCC (Part 15 Subpart B, CISPR 22 Class A)
Safety: UL/cUL (UL60950-1, CSA C22.2 No. 60950-1-03), TÜV
(EN60950-1)
Reliability
Alert Tools: Built-in buzzer and RTC (real-time clock)
Automatic Reboot Trigger: Built-in WDT (watchdog timer)
Automatic Reboot Trigger: Built-in WDT (watchdog timer)
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Details: See www.moxa.com/warranty
Note: The Hardware Specifications apply to the embedded computer unit itself,
but not to accessories. In particular, the wide temperature specification does
not apply to accessories such as the power adaptor and cables.