Navico Auckland Limited LVR880US Manuale Utente
10
2.7 16
LVR-880EU only.
Priority channel. Also on the microphone. Press to cancel all other modes and to tune into the priority
channel, Channel 16, on high power. Press again to return to your original channel.
Priority channel. Also on the microphone. Press to cancel all other modes and to tune into the priority
channel, Channel 16, on high power. Press again to return to your original channel.
2.8 FM (FM Stereo Radio)
Note: You need to select your FM region. This selection specifies the range of the frequency band and
the frequency steps. See Section 4.11.
Press FM to enter FM RADIO mode and tune automatically to the most recent memorized frequency.
the frequency steps. See Section 4.11.
Press FM to enter FM RADIO mode and tune automatically to the most recent memorized frequency.
The LCD shows FM and the frequency (in this example, FM 106.35 MHz).
The ST symbol appears if a stereo signal is detected (not shown in this
example).
To quickly tune to a different FM radio station, turn the Channel Select knob
OR press + or - to change the frequency.
The ST symbol appears if a stereo signal is detected (not shown in this
example).
To quickly tune to a different FM radio station, turn the Channel Select knob
OR press + or - to change the frequency.
Press EXIT to return to operational mode.
If you are in FM RADIO mode, you can press ENT to enter SCAN mode. The SCAN symbol appears
on the LCD. Turn the Channel Select knob left or right to move to the next strong channel. After the
channel is selected, press ENT again to exit SCAN mode.
If you are in FM RADIO mode, you can press ENT to enter SCAN mode. The SCAN symbol appears
on the LCD. Turn the Channel Select knob left or right to move to the next strong channel. After the
channel is selected, press ENT again to exit SCAN mode.
2.9 IC (HAILER mode)
HAILER
>PA
FOG
>PA
FOG
PA
LISTEN
PA
HAIL
VOL
■■■■
LO HI
1. Hold
down IC for about 3 seconds to enter HAILER mode. Press ENT.
2. Press PTT to talk through the hailer. Turn the Channel Select knob OR press + or – to change the
volume.
3. Release PTT to LISTEN.
4. Press EXIT to return to operational mode.
4. Press EXIT to return to operational mode.
2.10 IC (FOG HORN mode)
HAILER
PA
>FOG
PA
>FOG
FOG HORN
>HORN
UNDERWAY
STOP
>HORN
UNDERWAY
STOP
FOG
HORN
UNDERWAY
STOP
>SAIL
STOP
>SAIL
SAIL
OUTPUT
VOL
■■■
LO HI
1. Hold
down IC for about 3 seconds to enter HAILER mode.
2. Select FOG and press ENT. There are 8 choices of of internationally recognized fog horn sounds
and timing:
•
HORN
•
UNDERWAY
•
STOP
•
SAIL
•
ANCHOR
•
TOW