Shenzhen Jingwah Information Technology Co. Ltd. W709A Manuale Utente

If the cursor is at 

  position, the device is at Camera mode.   

Click 

  to take picture.   

Click 

  to set the scene mode, Picture size, Picture quality, and 

colour effect.   
 
8.2 DV   

If the cursor is at 

  position, the device is at DV mode.   

Click 

  to take picture.   

Click 

  to set the colour effect or restore to default settings.     

 
9. Connect with external device 
9.1. Connect with PC 
Connect the device with the PC via the USB cable. The PC appears 
two new disk symbols after connected successfully. One is the TF 
card, and the other is the built-in flash.   
 
9.2. Applications 
For convenient usage, we installed some third party software in the 
MID. For detailed operation methods, please check the corresponding 
instruction. Some of the software may be able to be used in some area 
because of network service.   
 
IV. Troubleshooting 
1. 

Answer: 1) Reboot the device to see if it works OK. 
2) Charge the device by the charger to activate the battery. Make sure 
it has power before you operate it.   
3) It is suggested to upgrade the OS of the device by professional. 
2. 

Answer: the use time of the battery is all depend on the temperature 
and use instance. If the temperature is too high or too low, the use 
time of the battery might be effected. It is suggest using the device in 
normal temperature. The using time is also affected by increased 
volume and frequently operation.