Insulet Corporation 019 Manuale Utente

1. Use the Up/Down Controller buttons to enter your insulin-

to-carbohydrate ratio, then press Next. (Insulin-to-carbohy-
drate ratio is the number of carbs in grams covered by 1 unit 
of insulin.)

2. To save the ratio, press Done. To change the ratio, select the 

segment you wish to change and press Edit.

You can define up to 8 insulin-to-carbohydrate time seg-

ments. To enter additional ratios, choose [add new], then:
a. Press New.
b. Enter a start time for the segment, then press Next.
c. Enter an end time for the segment, then press Next.
d. Enter the insulin-to-carb ratio for the new time segment, 

then press Next.

e. To save the new ratio, press Done.

3. To see the ratios as a list, press List. To return to the graphic 

view, press Graph.

4. Press Save to accept the ratios you have set.

1. Use the Up/Down Controller buttons to enter how much 

one unit of insulin decreases your blood glucose, then press 
Next.

2. To save the correction factor, press Done. To change the 

factor, select the segment you wish to change and press Edit.

You can define correction factors for up to 8 time segments. 
To enter additional correction factors, choose [add new], 

then:
a. Press New.
b. Enter a start time for the segment, then press Next.
c. Enter an end time for the segment, then press Next.
d. Enter the correction factor, then press Next.
e. To save the new correction factor segment, press Done.

3. To see the factors as a list, press List. To return to the graphic 

view, press Graph.

4. Press Save to accept the correction factors you have set.

1. To set reverse correction, use the Up/Down Controller 

buttons to choose On or Off, then press Next.

If you enter carbs and reverse corrections are On, the 
System will subtract insulin from the suggested meal 
bolus to compensate for a low blood glucose (below 
the BG target you set). With reverse corrections Off, 
the System will not subtract insulin from the sug-
gested meal bolus dose due to a low BG. Follow your 
healthcare provider’s recommendation to set 
reverse correction On or Off.