Insulet Corporation 019 Manuale Utente

6. Pull out the cocking handle until it clicks (Figure 7-15). (You 

may have already cocked the handle in step 2. This is okay.)

You are now ready to perform a blood glucose test.

1. Insert a new blood glucose test strip into the test strip port 

until it stops. The test strip port is at the bottom of the PDM.

2. To help you see the test strip port in reduced lighting, press 

the middle soft key labeled Light. To turn the light off, press 
Light again.

3. Insert only the bottom end of the strip into the test strip port 

(Figure 7-16 and Figure 7-17).

Consult your lancing device instructions to ensure 
proper usage.

From some PDM screens, you cannot access the One-

Touch® Verio™ blood glucose meter. For example, you 

cannot use the meter while you are activating a Pod 
or when an alert, alarm or communication error 
screen is displayed. In these cases, if you insert a test 
strip, the PDM beeps to alert you.