Insulet Corporation 019 Manuale Utente
83
7
2. Insert a test strip into the test strip port with the gold
side of the test strip and silver prongs facing you. (Figure 7-3) until it stops. This turns on the PDM on the screen. Refer
to page 57 to check Pod status and to Confirm ID.
to page 57 to check Pod status and to Confirm ID.
Figure 7-2
Channel to apply sample
OneTouch® Verio™
test strip
Silver prongs, insert into test strip port
Always verify that you are using OneTouch®
Verio™ test strips with your PDM (Figure 7-4).
From some PDM screens, you cannot access the One-
Touch® Verio™ blood glucose meter. For example, you
cannot use the meter while you are activating a Pod
or when an alert, alarm or communication error
screen is displayed. In these cases, if you insert a test
strip, the PDM beeps to alert you.
or when an alert, alarm or communication error
screen is displayed. In these cases, if you insert a test
strip, the PDM beeps to alert you.
Figure 7-3
Figure 7-4