TOYS "R" US 96849 Manuale Utente
Installing the Antenna
1. Route the loose end of the motorcycle’s antenna wire through the supplied antenna
tube.
2. Insert the tube securely into the motorcycle’s tube holder.
Driving The Motorcycle
1. Extend the transmitter’s antenna to its full
length before driving the motorcycle. For
maximum range, hold the transmitter with the
antenna as high as possible and point it
straight up.
2. Turn the Motorcycle and Transmitter’s
ON/OFF switch to ON. The LED indicator on
the transmitter illuminates.
3. Hold the front of the seat and lift the rear wheel
of the Motorcycle off the ground.
4. Push the Left Control Lever on Transmitter
forward for about 5 seconds to conducts a
warm up drive of the Motorcycle rear wheel.
5. Release the motorcycle on floor and start
driving. Be sure to run in a large open area
as the unit requires more space to make a full
turn than most radio controlled vehicles.