Q-MAC Electronics Pty Ltd HF90 Manuale Utente
HF-90 Operation & Installation Guide
should observe the following check-list.
Base station systems
Positioning the HF-90
Ensure that the HF-90 is mounted in a position which
allows easy access for operation. In addition, the
loudspeaker should be positioned close to where the
operator will sit.
allows easy access for operation. In addition, the
loudspeaker should be positioned close to where the
operator will sit.
The HF-90 must be mounted in a position which
allows a free flow of air through the rear heatsink
(cooling fins).
allows a free flow of air through the rear heatsink
(cooling fins).
When installing the HF-90 in a base station you should
use the Q-MAC HF-90 Mounting Cradle. Assembly
instructions are provided with each cradle.
use the Q-MAC HF-90 Mounting Cradle. Assembly
instructions are provided with each cradle.
Do not expose the HF-90 to direct sunlight for
extended periods.
extended periods.
In a base station installation the HF-90 should not be
placed directly on top of the Mains PSU. Some PSUs
can generate an excessive amount of heat.
placed directly on top of the Mains PSU. Some PSUs
can generate an excessive amount of heat.
53
Section 8.3
Power source
Do not connect the HF-90 directly with AC mains
supply. This will cause serious damage to the HF-90
and may result in personal injury.
supply. This will cause serious damage to the HF-90
and may result in personal injury.