Pro-Nets Technology Corporation WR514A Manuale Utente

DC IN 

Connect with DC Power Adapter. 

Reset 

Reset configurations to default.    Press the button and hold for 10 

seconds. 

WPS   

Click WPS button about 2-3 seconds while you are connecting a PC of 

wireless adapter with WPS function (you must enable WPS’ PBC 

function).   

LAN  

(1x, 2x, 3x, 4x) 

Connect LAN systems with RJ-45 cable. 

WAN 

Connect DSL or Cable modem. 

 

System Requirements 

‧  One or more PCs (desktop or notebook) with Ethernet interface. 

‧  TCP/IP protocol must be installed on all PCs. 

‧  Have valid Internet Access account and a DSL or cable modem. 

‧  10/100BaseT network cables with RJ-45 connectors. 

‧  In case to use Wireless Access Point, all Wireless devices must be compliant with 

IEEE 802.11b/g. 

‧  System with MS Internet Explorer ver. 5.0 or later, or Netscape Navigator ver. 4.7 or 

later. 

 

Installation Instruction 

1)  Power off Wireless Router and DSL/cable modem. 

2)  Connect systems to the LAN ports on the Wireless Router with straight LAN cables. 

3)  Connect the DSL or cable modem to the WAN port on the Wireless Router. 

4)  Power on DSL or cable modem first, then connect power adapter to the power jack 

on the Wireless Router and plug the power cable into an outlet. 

5)  Check LEDs.   

a)  Once power on Wireless Router, Power LED should be on. 

b)  LAN LED should be on for each active LAN connection. 

c)  The WAN LED should be on when the DSL or cable modem is connected. 

 

Warning: Only use the power adapter is provided from this package, use other power adapter 

may cause hardware damage.