Pro-Nets Technology Corporation WR514A Manuale Utente

Channel: The radio channel for wireless connection operation. 

Wireless Mode: This field indicates the 802.11g interface mode. Select [Auto] to allow the 

connection to the Wireless Router of 802.11g and 802.11b wireless mobile clients. Select [54g 

Protection] to enable G-Mode protection for 802.11g traffic automatically in the presence of 

11b traffic. 

Authentication Method: This field enables the authentication methods for wireless clients. 

WPA Encryption: Enable WPA Encryption to encrypt data. 

WPA Pre-Shared Key: This field requires a password of 8 to 63 characters to start the 

encryption process. If you leave this field blank, the default [00000000] will be assigned as 

your password. 

WEP Encryption: Enable WEP Encryption to encrypt data. 

Key Index: Set the WEP key to transmit data on your wireless. 

WEP Key 1~4: Only valid when using WEP encryption algorithm. The key must match with the 

AP’s Key.   

Passphrase: Select [WEP-64bits] or [WEP-128bits] in WEP encryption field to generate four 

WEP keys automatically. 

Network Key Rotation Interval: This field specifies the interval (in seconds) after which a 

WPA group key is changed. Enter [0] (zero) to indicate that a periodic key-change is not 

required. 

WPS 

WPS (Wi-Fi Protected Setup) provides easy and secure establishment of a wireless network. 

You can configured WPS here via the by PIN code method. 

Enable WPS: Allowing Wi-Fi Protected Setup (WPS) to simplify the process of connecting any 

device to the wireless network. WPS support the authentication of Open system, Share key, 

WPA-Personal, WPA2-Personal. Not support WPA-Enterprise, WPA2-Enterprise and Radius. 

AP PIN Code: Remember the PIN code of AP (the same as PIN code in the bottom of 

WIRELESS ROUTER). Input this PIN code in client's WPS utility and utility will configure the 

wireless security setting of WIRELESS ROUTER.