Pro-Nets Technology Corporation WR514A Manuale Utente
17
IP Address: Assign an IP address for each DHCP client. The IP address should comply with
the DHCP address pool you specified. The DHCP address pool contains the range of the IP
address that will automatically be assigned to the clients on the network.
Route
This function allows you to add routing rules into WIRELESS ROUTER. It is useful if you
connect several routers behind WIRELESS ROUTER to share the same connection to the
Internet.
Network/Host IP: It stands for the destination network or host of a route rule. So it could be a
host address, such as 「192.168.123.11」 or a network address, such as 「192.168.0.0」.
Netmask: It indicates how many bits are for network ID and subnet ID. For example: if the
dotted-decimal netmask is 255.255.255.0, then it’s netmask bits is 24. If the destination is a
host, its netmask bits should be 32.
Gateway: It stands for the IP address of gateway where packets are routed to. The specified
gateway must be reachable first. It means you have to set up a static route to the gateway
beforehand.
Metric: Metric is a value of distance for the network
Interface: Network interface that the route rule applies to.
WAN
Configure the internet connection, QoS, and Server settings.
Internet Connection
WIRELESS ROUTER supports several connection types to WAN. These types are selected
from the dropdown menu beside WAN Connection Type. The setting fields differ depending on
the connection type you selected.