Suunto 25002D Manuale Utente
14
2.1.1. Mode indicator
On the left side of the display there is a mode indicator that shows you the currently
active mode. The mode indicator displays the modes from the top down in the
following order: TIME, ALTI/BARO, TRAINING and SPD/DIST. The active mode is
indicated by the moving segment next to the indicator bar.
On the left side of the display there is a mode indicator that shows you the currently
active mode. The mode indicator displays the modes from the top down in the
following order: TIME, ALTI/BARO, TRAINING and SPD/DIST. The active mode is
indicated by the moving segment next to the indicator bar.
2.1.2. Battery level indicator
On the upper side of the display there is a battery level indicator. The indicator is
activated when approximately 5–15 percent of the battery capacity is still available.
When this occurs, you should replace the battery.
On the upper side of the display there is a battery level indicator. The indicator is
activated when approximately 5–15 percent of the battery capacity is still available.
When this occurs, you should replace the battery.
2.1.3. Alarm symbols
Suunto t6 can display 2 different alarm symbols: Time alarm and HR limits or Speed
limits alarm. When you set a time alarm, its symbol is displayed in the lower right
hand corner of the display. When you set a HR limits alarm, its symbol is displayed in
the upper left hand corner of the display.
Suunto t6 can display 2 different alarm symbols: Time alarm and HR limits or Speed
limits alarm. When you set a time alarm, its symbol is displayed in the lower right
hand corner of the display. When you set a HR limits alarm, its symbol is displayed in
the upper left hand corner of the display.
2.1.4. Key Lock
The key lock prevents you from accidentally pushing the buttons.
To activate the key lock:
Press ENTER.
Press START/STOP within 2 seconds. The buttons are locked and is displayed in the
upper right corner. If you try to press a button, the message “unlock press enter” is
displayed.
The key lock prevents you from accidentally pushing the buttons.
To activate the key lock:
Press ENTER.
Press START/STOP within 2 seconds. The buttons are locked and is displayed in the
upper right corner. If you try to press a button, the message “unlock press enter” is
displayed.