Suunto 25002D Manuale Utente
45
Removing the battery, shortcutting the transmitter belt and putting the battery back
again activates the ID transmission of the transmitter belt.
NOTE: The transmitter belt is already paired with the device when it leaves the fac-
again activates the ID transmission of the transmitter belt.
NOTE: The transmitter belt is already paired with the device when it leaves the fac-
tory. However, if you use either another device or transmitter belt or if you encounter
problems with the heart rate measurement, you need to pair it again.
Wireless speed and distance sensor
To pair the wireless speed and distance sensor:
1. Select Pair in the Training menu.
2. Select SPD SENS. The message ‘
Wireless speed and distance sensor
To pair the wireless speed and distance sensor:
1. Select Pair in the Training menu.
2. Select SPD SENS. The message ‘
TURN
ON
NEW
DEVICE
’ is displayed.
3. Turn the wireless speed and distance sensor on. After 30 seconds either ‘
PAIRING
COMPLETE
’, or, if pairing failed, ‘
NO
DEVICES
FOUND
’ is displayed.
NOTE: You can only connect one wireless speed and distance sensor at a time.
3.4.9. Use (Alti/Baro)
With this function you can select whether altitude information is recorded in the
logbook memory with other information. Refer to section 3.3.1 Use (Alti/Baro).
With this function you can select whether altitude information is recorded in the
logbook memory with other information. Refer to section 3.3.1 Use (Alti/Baro).