Suunto 25002D Manuale Utente
9
3. Remove the battery compartment cover. Ensure that the O ring and all surfaces are
clean and dry. Do not stretch the O ring.
4. Remove the old battery carefully.
5. Place the new battery into the battery compartment with the positive side facing up.
5. Place the new battery into the battery compartment with the positive side facing up.
Make sure to gently slide the battery underneath the contact plate on the side,
ensuring that it does not break or bend out of place.
ensuring that it does not break or bend out of place.
6. With the O ring in the correct position, replace the battery compartment cover and
turn it with the coin clockwise until it is aligned with the close position marker.
NOTE: Replace the battery with extreme care to ensure that your Suunto t6 remains
water resistant. Careless battery replacement may void warranty.
NOTE: Heavy use of the backlight, especially in the Night Use setting, will signifi-
NOTE: Heavy use of the backlight, especially in the Night Use setting, will signifi-
cantly reduce battery life.
1.6. REPLACING THE BATTERY OF THE TRANSMITTER BELT
The transmitter belt operates on a 3-Volt lithium cell, type: CR 2032.
The average expected battery life of the transmitter belt is 300 hours of use in ideal
operating temperatures.
When your Suunto t6 is not receiving a signal, when the transmitter belt is active, you
might need to replace the battery.
NOTE: When the low-battery indicator is on, the HR transmission becomes automati-
The transmitter belt operates on a 3-Volt lithium cell, type: CR 2032.
The average expected battery life of the transmitter belt is 300 hours of use in ideal
operating temperatures.
When your Suunto t6 is not receiving a signal, when the transmitter belt is active, you
might need to replace the battery.
NOTE: When the low-battery indicator is on, the HR transmission becomes automati-
cally disabled.