Sena Technologies Inc. SP01 Manuale Utente

| SPH10 

 

8 

 

 

To power on and off the headset, you don’t need to press and hold any button for several 

seconds. Just short press the Jog Dial and the Phone Button simultaneously, and you will get 

quick on-and-off convenience.     

 

Press the Jog Dial and the Phone Button at the same time for about 1 second to power on. 

The blue LED turns on and you will hear ascending beeps.   

 

Just short press the Jog Dial and the Phone Button simultaneously, you don’t need to press 

and hold for a few seconds. The red LED turns on for a while until it turns off completely and 

you will hear descending beeps. 

 

The LED turns on red while charging, and turns to blue when the headset is fully charged. It 

takes about 2.5 hours to be completely charged. 

When the battery is low, the blinking blue LED in stand-by mode turns to red and you will hear 

mid-tone triple beeps.