Navtech Radar Ltd TS350X-001 Manuale Utente
Health & Safety
Installation Guide
–I Series
2-10
Doc ref: MAINT- 0111
Issue 1.2
Figure 9
Plan view of a radar, showing the encoder zero angle
2.3
Mounting radar sensor
Radar sensors may be mounted on various structures (e.g walls, roofs, gantries) using brackets.
Sample posts and brackets are shown in Annex B.
Radar sensors are fitted to a plate on top of the post, or on the bracket, using nuts and bolts,
which allows you to adjust the tilt [See Figure 11]. Adjusting the tilt (levelling the sensor)
ensures optimum detection performance and is detailed in Section 2.7.
Figure 10
Mounting radar on posts/brackets, for both vertical and horizontally
scanning radar
scanning radar