Navtech Radar Ltd TS350X-001 Manuale Utente
Annex A
Installation Guide
– I Series
A -1
Doc ref: MAINT- 0110
Issue 1.2
Annex A Using SPx RadarView
The SPx RadarView application consists of two files which must be located in the same folder (any folder)
on your laptop:
on your laptop:
SPXRadarView.exe
SPXRadarView.rpi
1.
Run SPXRadarView.exe. You should see a blank main screen:
Note:
In the lower panel, the Video and Turn indicators will be red indicating that
there is no communication with the sensor.
there is no communication with the sensor.
2.
Click the Channel-A menu on the toolbar, and select the Source... option.
Ensure that the Selection option is set to Network and in the Address field,
enter the IP Address of the sensor. The Port must be set to 700.
Click OK.