Cisco AC 27 CAB-C13-C14-JMPR= Manuale Utente
Codici prodotto
CAB-C13-C14-JMPR=
This is used in order to connect
to 10/100 or 10/100/1000
Ethernet ports and 1000Base-T
Gigabit Interface Converter
(GBIC) or small form factor
pluggable (SFP) GBIC ports.
10/100/1000 Ethernet ports must
use four twisted-pair Category 5,
5e or 6 cables.
to 10/100 or 10/100/1000
Ethernet ports and 1000Base-T
Gigabit Interface Converter
(GBIC) or small form factor
pluggable (SFP) GBIC ports.
10/100/1000 Ethernet ports must
use four twisted-pair Category 5,
5e or 6 cables.
This is used in order to connect
to 10/100BASE-TX RJ-21 telco
interfaces. Use Category 5 UTP
cables with male RJ-21.
to 10/100BASE-TX RJ-21 telco
interfaces. Use Category 5 UTP
cables with male RJ-21.
MT-RJ Fiber-Optic
SC Fiber-Optic
This is used in order to
connect to 100Base-FX fiber-
optic ports. Use multimode
fiber (MMF) cables with MT-
RJ connectors.
connect to 100Base-FX fiber-
optic ports. Use multimode
fiber (MMF) cables with MT-
RJ connectors.
This is used in order to
connect to 100Base-FX,
1000Base-SX, Long
Wavelength/Long Haul (LX/
LH) and ZX fiber-optic
ports or GBICs. Use MMF
or single-mode fiber (SMF)
fiber-optic cable.
connect to 100Base-FX,
1000Base-SX, Long
Wavelength/Long Haul (LX/
LH) and ZX fiber-optic
ports or GBICs. Use MMF
or single-mode fiber (SMF)
fiber-optic cable.