GRAUPNER CO. LTD. 16007812 Manuale Utente

24 / 28

S1002.PRO_jh_V1

Bar 1

Throttle/brake servo or airbrake right

Bar 2

Aileron or left aileron

Bar 3

Elevator

Bar 4

Rudder

Bar 5

Aileron right / free channel

Bar 6

Flap (left) / free channel or 2nd elevator servo

For helicopter models, the display follows the assignment below:

Bar 1

Pitch or roll (2) or nick (2) servo

Bar 2

Roll (1) servo

Bar 3

Nick (1) servo

Bar 4

Yaw servo (gyro)

Bar 5

 Gyro or Nick (2) Servo

Bar 6

Throttle servo or speed controller

Pushing the ESC key () of the right four-way keys you turn back to 

the related output point. 

Note that the servo display refers exclusively to the original sequence 

of the servos, that is, it does not refer to any changes to the outputs 

made in the "Transmitter settings" menu, or via telemetry in 

the "Receiver output " submenu of the "Transmitter setting" menu.

The count of the channels displayed in this menu refers to the 12 

control channels available in this transmitter 

mz-12PRO HoTT. The 

number of usable channels depends on the type of receiver as well 

as the number of connected servos and may therefore be signifi-

cantly less.The number of usable channels depends on the type of 

receiver as well as the number of connected servos and may there-

fore be significantly less.