ZTE Corporation ZTEV813W Manuale Utente
26
battery.
1. Connect the adapter to the charger jack. Ensure that the
adapter is inserted with the correct orientation. Do not
force the connector into the charger jack.
force the connector into the charger jack.
2. Connect the charger to a standard AC wall outlet.
3. Disconnect the charger when the battery is fully charged.
WARNING! Use only ZTE-approved chargers and cables.
The use of unapproved accessories could damage your
phone or cause the battery to explode.
The use of unapproved accessories could damage your
phone or cause the battery to explode.
NOTE:
●
If excessive discharge of the battery, the charging icon will
display delay.
display delay.
●
If the battery is extremely low, you may be unable to power
on the phone even when it is being charged. In this case,
try again after charging the phone for at least 10 minutes.
Contact customer service if you still cannot power on the
phone after prolonged charging.
on the phone even when it is being charged. In this case,
try again after charging the phone for at least 10 minutes.
Contact customer service if you still cannot power on the
phone after prolonged charging.
Switching Your Phone On/Off
Make sure the SIM card is in your device and the battery is
charged.
Hold Power Key to switch on your phone.
To switch it off, hold Power Key to get the phone options.
charged.
Hold Power Key to switch on your phone.
To switch it off, hold Power Key to get the phone options.