Weifang Goertek Electronics Co. Ltd GBDA60 Manuale Utente

Pagina di 6
  
         
GBDA60  User  Guide
 
 
1. Introduction
 
 
This document specifies the ways for simple use to GBDA60 . 
 
2. User interface tables
 
2.1 Press 
Function 
GSH300 
GBDA60 
Button 
Power On 
Off 
Long-press (2s) PAP until blue 
LED flashes  
Pairing Pairing 
Off 
Very-long-press (5s) PAP until 
LED flashes blue/red 
Initiate 
connect 
On and no AV 
connect 
On and in Standby 
state 
Short-press (1s) PAP 
Power Off 
On 
Very-long-press (5s) PAP until 
red LED flashes 
 
Note
A Short Press is assumed to be any button press less than or equal to
 
1
 
seconds.  A 
Long Press is assumed to be any button press longer than 2 seconds. See the following 
tables for detailed press-functionality descriptions 
 
 
 
2.2 LED
 
 
Note : 
 Full battery voltage has been set to 3.7V 
Low battery voltage has been set to 3.3V  
 
Shutdown voltage has been set to 3.0V 
To temporarily return from shutdown point change battery  
 
GBDA60 State 
Blue LED 
Red LED 
Power off 
OFF 
OFF 
Pairing mode 
Blue LED and Red LED 
flash by turns 
Red LED and Blue LED 
flash by turns 
Pairing successful 
Flash 3 times 
OFF 
Standby(no audio channel) 
Flash 1 time every 2s 
OFF 
Active mode (audio 
channel open) 
Flash 3 times in 500ms,long 
off 2s 
OFF 
Standby(Low battery) 
Flash 1 time every 2s 
Flash 1 time every 5s 
Active mode(Low battery) 
Flash 3 times in 500ms,long 
off 2s 
Flash 1 time every 5s 
Charging mode 
Across to the status 
On until charging is over