EnOcean GmbH PTM200C Manuale Utente

1.2 Typical Applications

•  Building installation
•  Industrial automation
•  Consumer electronics

Key applications are wall-mounted flat rocker switches with 1 or 2 rockers, as well as handheld
remote controls with up to 4 single pushbuttons. Because the RF transmitters are self-powered

(no batteries), maintenance-free RF systems are possible.

1.3 Features Overview

Power supply: ............................................................. Electro-dynamic Power Generator
(power generation by rocker operation)
Frequency / transmission power:....................... 315.0 MHz / typ. 3dBm at antenna input
Modulation type / data rate: ................................................................. ASK / 125 kbps

Antenna:........................................................external whip antenna 26.8 cm,

1.3

±0.1

Transmission range:  ..........................................up to 200 m free field, up to 30m indoor
Telegram packet length (sub-telegram):................................................ 0.7 ms +/-5%
No. of (redundant) packets: ................................... 3 – 5 (depending on residual energy),
                                                      3 packets within about 20 ms, delay effected at random
Number of channels:................................................ 2 channels with 4 action states each
                                                                 (upper/lower contact nipple is pressed/released)
Telegram type: ........................................................................................RPS of type 2
                                            (allows interpretation of operating two buttons simultaneously)
Device identifier:  ............................................ individual 32-bit ID (factory programmed)

1.4 Mechanical Interface

Device dimensions: ................................................................ 40.0 x 40.0 x 11.2*) mm

*) Height without label

Device weight: .............................................................................................20 g ± 1g
Energy bow travel / operating force: ...................................... 1.8 mm / approx. 7 N *)

*) at room temperature, only one energy bow may be actuated at the same time!

Restoring force at energy bow: .................................................................. 0.5N to 4N

For the correct function of the application, the specified minimal restoring force of 0.5N must be considered!

Number of operations: ...... typ 50.000 actuations tested according to VDE 0632 / EN 60669
Cover material: .................................................................................. Hostaform (POM)
Energy bow material:............................................................................ PBT (50% GV)

Page 5 of 19

PTM 200C User Manual V1.01