L-3 Communications Aydin Corporation 6000-8501900 Manuale Utente
P
AGE
10 • GSM T
ERMINAL
U
SER
G
UIDE
CALL RELATED SUPPLEMENTARY SERVICES
The GSM Terminal allows you to handle more than
one call simultaneously. You can put a call on hold,
then make another call, switch between the calls or
transfer calls.
Call Waiting
The GSM Terminal allows you to accept a call from
a second party (or dial a second party) while you are
in an existing call.
If you receive a call from a second party while you
are in a call you will hear a audible “Call Waiting”
indication tone on your telephone set. If you do not
respond to this indication in 10 seconds, you will
receive a second tone.
If Caller ID service is available from the network
and a Caller ID box is connected to the Terminal,
the waiting number will be appear on the Caller ID
display.
After receiving a Call Waiting indication you can
put the first call on hold and accept the second
call by pressing the Flash button (or making hook-
flash) and then pressing key “2” on the telephone
set. (Note: the key “2” must be pressed within 5
seconds). After that the waiting call will be put
through. To go back to the original call, press the
FLASH and “2” keys again.
Call Hold (Making second call)
To make a second call while a call is in progress, put
the active call on hold by pressing the Flash button
(or making hook-flash) and then key “2” on the
telephone set. You will hear 3 short beeps followed
by a dial tone to indicate that a new number can be
dialed for the second call.
Successively pressing the FLASH and “2” keys will
switch between two established calls.
Multi Party Call (Conference Call)
To link two established calls together into a
conference call press FLASH and key “3” This