L-3 Communications Aydin Corporation 6000-8501900 Manuale Utente

Pagina di 64
• P
AGE
 21
To disable CLIR, enter the following sequence:
#* 13 * 2
To retrieve status information about the CLIR 
service enter: 
*# 31 #
You will hear a confirmation tone if CLIR service is 
enabled, and a negative acknowledgment tone if the 
CLIR service is either disabled or if its setting are 
defined by the network. 
You can also change the CLIR settings temporarily 
on a per call basis without updating  the CLIR 
settings for all outgoing calls.
To disable CLIR on per call basis, enter the 
following sequence:
* 31 # PHONE_NUMBER  
To re-enable CLIR on per call basis, enter the 
following sequence:
#31 # PHONE_NUMBER 
Current Call Metering Services (CCM)
Current Call Metering service (CCM) allows you 
to enable or disable the presentation of the phone 
number, the direction (incoming or outgoing), and 
the duration of the last completed call.  When 
enabled, the phone number, the call direction 
and the call duration information will be sent 
automatically to a Caller ID box after the receiver is 
placed on the hook. 
This service is intended to inform users about 
their network usage. It is not intended to be an 
accurate measure for billing purposes. 
i In Call Waiting / Call Hold / Multi Party/ 
Explicit Transfer call scenarios, CCM service 
displays information about the last call session 
only. 
To enable CCM enter:
#* 14 * 1
E
XTENDED
 S
ERVICES