L-3 Communications Aydin Corporation 6000-8501900 Manuale Utente

• P

AGE

Wait for the confirmation tone before placing the

receiver on hook. The phone number, direction of

call and its duration will be displayed in the same

format as the CCM service display.

To retrieve the total call time since the last timer

reset, enter the following sequence:

#* 16

Wait for the confirmation tone before placing the

receiver on hook. Duration of all calls made since

the last rest of total call timers will be displayed in

following format:

ACM: hours : minutes : seconds

If duration of all calls exceeds 10000 hours, the

display format will be updated to show days and

hours in the following format:

ACM: days : hours

To reset the total call timer, enter:

<#*>17

Wait for the confirmation tone before placing the

receiver on hook.

Setting the Serial Port Data Rate

The data rate at which the GSM Terminal will

accept commands on the serial port (RA-232

interface) can be changed via the phone interface

with the following dialing string:

#* 23 * DATA_RATE

Wait for the confirmation tone before placing the

receiver on hook.

Available Data Rates (bps) : 0, 300, 600, 1200,

2400, 4800, 9600, 19200, 38400, 57600, 115200.

i Setting the data rate to a 0 activates the

autobauding feature. The GSM Terminal is

capable of detecting the connected terminal speed

in 300 to 57600 bits/s range when it is set to

autobauding.

XTENDED

ERVICES