TP-Link Technologies Co. Ltd. C20I Manuale Utente

 

- 7 - 

¾

 

Broadband Internet Access Service (DSL/Cable/Ethernet) 

¾

 

One DSL/Cable Modem that has an RJ45 connector (which is not necessary if the router is 

connected directly to the Ethernet) 

¾

 

PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors   

¾

 

TCP/IP protocol on each PC 

¾

 

Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari 

¾

 

Place the router in a well-ventilated place far from any heater or heating vent   

¾

 

Avoid direct irradiation of any strong light (such as sunlight) 

¾

 

Keep at least 2 inches (5 cm) of clear space around the router 

¾

 

Operating Temperature: 0℃~40℃ (32℉~104℉) 

¾

 

Operating Humidity: 10%~90%RH, Non-condensing 

Before installing the router, make sure your PC is connected to the Internet through the 

broadband service successfully. If there is any problem, please contact your ISP. After that, please 

install the router according to the following steps. Don't forget to pull out the power plug and keep 

your hands dry. 

1.  Power off your modem (if the modem has a backup battery, please remove it too.), and 

disconnect your existing router if you have one. 

2. Connect 

the 

Internet port on your router to the modem’s LAN port with an Ethernet cable. 

3.  Connect your computer to one of the Ethernet ports labeled 1~4 on the router with an 

Ethernet cable. 

4.  Power on the modem and wait for 2 minutes. 

5.  Then plug the provided power adapter into the Power jack and the other end to a standard 

electrical wall socket. Press the Power On/Off button to power on the router. (Before you