TP-Link Technologies Co. Ltd. C20I Manuale Utente

 

- 68 - 

2.  If you cannot use the new user name and password to access the shares, press Windows 

logo + R to open the Run dialog box and type net use \\192.168.1.1 /delete /yes and press 

Enter. (192.168.1.1 is your router's LAN IP address. If the LAN IP of the modem connected 

with your router is 192.168.1.x, the default LAN IP of the router will automatically switch from 

192.168.1.1 to 192.168.0.1 to avoid IP conflict; in this case, please try net use \\192.168.0.1 

/delete / yes.) 

Choose menu “USB Settings→Storage Sharing”, you can configure a USB disk drive attached 

to the router and view volume and share such properties as share name, directory, user access, 

and status on this page as shown below. 

 

Figure 4-52 Storage Sharing 

¾

 

Server Status - Indicates the Storage Sharing server's current status. You can click the 

Enable button to start the Storage Sharing service and click the Disable button to stop it.     

¾

 

Anonymous access to all volumes – Check this box to allow users to access to all 

volumes without username or password 

¾

 

Shared Name - The volume name of the USB drive the users have access to.   

¾

 

Directory - The directory of the shared folder.   

¾

 

User Access – Indicates user access of the shared folder. F stands for fully access, R 

stands for read-only and N stands for no-access.   

¾

 

Status - Indicates the shared or non-shared status of the volume.