TP-Link Technologies Co. Ltd. D5V2 Manuale Utente

76

Chapter 12

Specify Your Network Settings

Now your working devices connected to LAN1 and LAN3 are in 
an isolated group!

Note: VLAN function is enabled by default. You cannot disable it when IPTV is 

enabled.

A static route is a pre-determined path that network information must travel to reach 
a specific host or network. Data from one point to another will always follow the same 
path regardless of other considerations. Normal Internet usage does not require this 
setting to be configured.

Visit multiple networks and multiple servers at the same time.

For example

, in a small office, my PC can surf the Internet, but I 

also want to visit my company’s server. Now I have a switch and 
another router. I connect the devices as shown in the following 
figure so that the physical connection between my PC and my 
company’s server is achieved. To surf the Internet and visit my 
company’s network at the same time, I need to configure the 
static routing.

Company’s server

My PC

Router 2

Modem router

Switch

LAN: 192.168.0.1

192.168.0.100

LAN: 192.168.0.2

WAN: 172.30.30.100

172.30.30.1

1   Make sure the routers use different LAN IP addresses on the 

same subnet. Disable Router 2’s DHCP function.

2   Visit 

, and log in with the password you set 

for the modem router. 

3   Go to 

Advanced

 > 

Network 

> 

Advanced Routing

. Select your 

current 

WAN Interface

 and click 

Save

.