TP-Link Technologies Co. Ltd. MW8901G Manuale Utente

46

Choose “Access Management

ėSNMP”, you can see the SNMP screen. The Simple Network 

Management Protocol (SNMP) is used for exchanging information between network devices. 

Figure 4-36 

¾

Get Community: Set the password for the incoming Get and Get next requests from the 

management station. 

¾

Set Community: Set the password for incoming Set requests from the management station. 

Choose “Access Management

ėUPnP”, you can configure the UPnP in the screen (shown in 

Figure 4-37). 

UPnP (Universal Plug and Play) is a distributed, open networking standard that uses TCP/IP for 

simple peer-to-peer network connectivity between devices. An UPnP device can dynamically join 

a network, obtain an IP address, convey its capabilities and learn about other devices on the 

network. In turn, a device can leave a network smoothly and automatically when it is no longer in 

use. UPnP broadcasts are only allowed on the LAN. 

Figure 4-37 

¾

UPnP: Activate or Deactivate the UPnP function. Only when the function is activated, can the 

UPnP take effect. 

¾

Auto-Configure: If you activate the function, then the UPnP network devices can 

automatically configure network addressing, announce their presence in the network to other 

UPnP devices and enable exchange of simple product and service descriptions.