TP-Link Technologies Co. Ltd. TDW8950ND Manuale Utente

more WLANs. If this checkbox is selected, you will have to set the following parameters as 
shown below. Make sure the following settings are correct 

 

¾

 

SSID(to be bridged): The SSID of the AP your Router is going to connect to as a client. 
You can also use the search function to select the SSID to join. 

¾

 

BSSID(to be bridged): The BSSID of the AP your Router is going to connect to as a client. 
You can also use the search function to select the BSSID to join. 

¾

 

Search: Click this button, you can search the AP which runs in the current channel. 

¾

 

Key type: This option should be chosen according to the AP's security configuration.It is 
recommended that the security type is the same as your AP's security type 

¾

 

WEP Index: This option should be chosen if the key type is WEP(ASCII) or WEP(HEX).It 
indicates the index of the WEP key. 

¾

 

Auth Type: This option should be chosen if the key type is WEP(ASCII) or WEP(HEX).It 
indicates the authorization type of the Root AP. 

¾

 

Password: If the AP your Router is going to connect needs password, you need to fill the 
password in this blank. 

Click Apply/Save to save your settings. 

Choose menu “Wireless→Security”, you can configure the security settings of your wireless 
network. 

There are five wireless security modes supported by the Router: WEP (Wired Equivalent Privacy), 
WPA (Wi-Fi Protected Access), WPA2 (Wi-Fi Protected Access 2), WPA2-PSK (Pre-Shared Key), 
WPA-PSK (Pre-Shared Key). 

61