TP-Link Technologies Co. Ltd. TDW8950ND Manuale Utente
TD-W8950ND
150Mbps Wireless Lite N ADSL2+ Modem Router User Guide
To modify or delete an existing entry:
3. Click the Modify in the entry you want to modify. If you want to delete the entry, click the
Delete.
4. Modify the information.
5. Click the Save button.
5. Click the Save button.
Click the Enable All button to make all entries enabled
Click the Disabled All button to make all entries disabled.
Click the Delete All button to delete all entries
Click the Next button to go to the next page
Click the Previous button to return to the previous page.
For example: If you desire that the wireless station A with MAC address 00-0A-EB-00-07-8A and the
wireless station B with MAC address 00-0A-EB-00-23-11 are able to access the Router, but all the
other wireless stations cannot access the Router, you can configure the Wireless MAC Address
Filtering list by following these steps:
wireless station B with MAC address 00-0A-EB-00-23-11 are able to access the Router, but all the
other wireless stations cannot access the Router, you can configure the Wireless MAC Address
Filtering list by following these steps:
1. Click the Enable button to enable this function.
2. Select the radio button: Deny the stations not specified by any enabled entries in the list to
access for Filtering Rules.
3. Delete all or disable all entries if there are any entries already.
4. Click the Add New... button and enter the MAC address 00-0A-EB-00-07-8A
/00-0A-EB-00-23-11 in the MAC Address field, then enter wireless station A/B in the
Description field, while select Enabled in the Status pull-down list. Finally, click the Save and
the Back button.
Description field, while select Enabled in the Status pull-down list. Finally, click the Save and
the Back button.
The filtering rules that configured should be similar to the following list:
4.6.4 Advanced
Choose “Wireless→Advanced”, you will see the screen of Wireless Advanced settings shown as
below.
below.
66