TP-Link Technologies Co. Ltd. TDW8961NDV3 Manuale Utente

 

 

7

¾  The Product should not be located where it will be exposed to moisture or excessive heat. 
¾  Place the Router in a location where it can be connected to the various devices as well as to 

a power source. 

¾  Make sure the cables and power cord are safely placed out of the way so they do not create a 

tripping hazard. 

¾  The Router can be placed on a shelf or desktop. 
¾  Keep away from the strong electromagnetic radiation and the device of electromagnetic 

sensitive. 

Before installing the device, please make sure your broadband service provided by your ISP is 

available. If there is any problem, please contact your ISP. Before cable connection, cut off the 

power supply and keep your hands dry. You can follow the steps below to install it. 

Step 1:  Connect the ADSL Line. 

Method one: Plug one end of the twisted-pair ADSL cable into the ADSL port on the rear 

panel of TD-W8961ND, and insert the other end into the wall socket. 

Method two：You can use a separate splitter. External splitter can divide the data and 

voice, and then you can access the Internet and make calls at the same time. The 

external splitter has three ports: 

• LINE: Connect to the wall jack 

• PHONE: Connect to the phone sets 

• MODEM: Connect to the ADSL port of TD-W8961ND 

Plug one end of the twisted-pair ADSL cable into the ADSL port on the rear panel of 
TD-W8961ND. Connect the other end to the MODEM port of the external splitter. 

Step 2:  Connect the Ethernet cable. Attach one end of a network cable to your computer’s 

Ethernet port or a regular hub/switch port, and the other end to the LAN port on the 

TD-W8961ND. 

Step 3:  Power on the computers and LAN devices. 

Step 4:  Attach the power adapter. Connect the power adapter to the power connector on the rear 

of the device and plug in the adapter to a electrical outlet or power extension. The 

electrical outlet shall be installed near the device and shall be easily accessible.