TP-Link Technologies Co. Ltd. TDW8961NDV3 Manuale Utente

 

 

39

• 

SSID: Wireless network name shared among all points in a wireless network. The SSID 

must be identical for all devices in the wireless network. It is case-sensitive and must not 

exceed 32 characters (use any of the characters on the keyboard). Make sure this 

setting is the same for all stations in your wireless network. Type the desired SSID in the 

space provided. 

• 

Authentication Type: Select an authentication type from the drop-down list, which 

allows you to configure security features of the wireless LAN interface. Options available 

are: Disabled, WEP-64Bits, WEP-128Bits, WPA-PSK, WPA2-PSK, and WPA-PSK/ 

WPA2-PSK.  

¾  WDS Settings: Select On/Off to enable/disable WDS. With this function enabled, the Router 

can bridge two or more WLANs. 
• 

MAC Address: Enter the MAC Address you wish to bridge in the field. 

¾  Wireless MAC Address Filter: Wireless access can be filtered by using the MAC addresses 

of the wireless devices transmitting within your network’s RADIUS.   
• 

Active: If you wish to filter users by MAC Address, select “Activated”, and “Deactived” 

for don’t. 

• 

Action: To filter wireless users by MAC Address, select “Allow Association” or “Deny 

Association” the follow Wireless LAN station(s) association. 

• 

MAC Address: Enter the MAC Address you wish to filter in the field. 

) 

For most users, it is recommended to use the default Wireless LAN Performance settings. Any 

changes made to these settings may adversely affect your wireless network. Under certain 

circumstances, changes may benefit performance. Carefully consider and evaluate any changes 

to these wireless settings. 

Choose “Advanced Setup”, you can see the next submenus: 

 

Figure 4-24 

Click any of them, and you will be able to configure the corresponding function. 

Choose “Advanced Setup

→Firewall” menu, and you will see the next screen (shown in Figure