TP-Link Technologies Co. Ltd. TDW8968V1 Manuale Utente
TD-W8968
300Mbps Wireless N USB ADSL2+ Modem Router User Guide
6
1.3.2 The Back Panel
The Router's ports, where the cables are connected, and RESET button are located on the back
Figure 1-2
¾
POWER: The Power plug is where you will connect the power adapter.
¾
ON/OFF: The switch for the power.
¾
WPS: The switch for the WPS function. For details, please refer to
¾
RESET: There are two ways to reset the Router's factory defaults.
Method one: With the Router powered on, use a pin to press and hold the Reset button for at
least 5 seconds. And the Router will reboot to its factory default settings.
least 5 seconds. And the Router will reboot to its factory default settings.
Method two: Restore the default setting from “Maintenance-SysRestart” of the Router's
Web-based Utility.
Web-based Utility.
¾
WiFi: The switch for the WiFi function.
¾
USB: The USB port connects to a USB storage device or a USB printer.
¾
LAN1, LAN2, LAN3, LAN4/WAN: Through these ports, you can connect the Router to your
PC or the other Ethernet network devices. Enable EWAN function and you will be able to
connect to Cable/FTTH/VDSL/ADSL device.
connect to Cable/FTTH/VDSL/ADSL device.
¾
ADSL: Through the port, you can connect the router with the telephone. Or you can connect
them by an external separate splitter. For details, please refer to
.
¾
Antennas: Used for wireless operation and data transmit.