TP-Link Technologies Co. Ltd. TDW8980V1 Manuale Utente

 

49 

)

 

1)  The WPS LED on the modem router will light green for five minutes if the device has been 

successfully added to the network. 

2)  The WPS function cannot be configured if the Wireless Function of the modem router is 

disabled. Please make sure the Wireless Function is enabled before configuring the WPS. 

Choose menu “Wireless 2.4GHz”Æ” Wireless Security”, you can configure the security settings 
of your wireless network. 

There are three wireless security modes supported by the modem router: WPA/WPA2 – Personal, 
WPA/WPA2 – Enterprise, WEP (Wired Equivalent Privacy). 

 

Figure 4-35 

¾

  Disable Wireless Security: If you do not want to use wireless security, check this radio 

button. But it’s strongly recommended to choose one of the following modes to enable 
security. 

¾

  WPA/WPA2-Personal: It’s the WPA/WPA2 authentication type based on pre-shared 

passphrase. The modem router is configured by this security type by default. 

• 

Authentication Type: You can choose the type for the WPA/WPA2-Personal security on 
the drop-down list. The default setting is Auto, which can select WPA-PSK

 

or WPA2-PSK 

authentication type automatically based on the wireless station's capability and request. 

• 

Encryption: You can select Auto, TKIP or AES as Encryption. 

• 

Wireless Password: You can enter ASCII characters between 8 and 63 characters or 8 to 
64 Hexadecimal characters. The default password is the same with the default PIN code,