Manualsbrain.com
  1. Manuali
  2. Marche
  3. TP-Link Technologies Co. Ltd.
  4. WA60XG
  5. Manuale Utente

TP-Link Technologies Co. Ltd. WA60XG Manuale Utente

Scarica
Pagina di 42
TL-WA601G
108M Wireless Access Point User Guide
 
 
18
encryption. "Disabled" means this WEP key entry is invalid. 
1)  For 64-bit encryption - You can enter 10 hexadecimal digits (any combination of 0-9, 
a-f, A-F, zero key is not permitted) or 5 ASCII characters.   
2)  For 128-bit encryption - You can enter 26 hexadecimal digits (any combination of 
0-9, a-f, A-F, zero key is not permitted) or 13 ASCII characters.   
3)  For 152-bit encryption - You can enter 32 hexadecimal digits (any combination of 
0-9, a-f, A-F, zero key is not permitted) or 16 ASCII characters.   
)
 
Note: 
If you do not set the key, the wireless security function is still disabled even if you have selected 
Shared Key as Authentication Type. 
¾
  WPA/WPA2 - Select WPA/WPA2 based on Radius Server. 
• 
Version - You can select one of following versions, 
1)  Automatic - Select WPA or WPA2 automatically based on the wireless station's 
capability and request.   
2)  WPA - Wi-Fi Protected Access.   
3)  WPA2 - WPA version 2.   
• 
Encryption -
 
You can select either Automatic, or TKIP or AES.
 
• 
Radius Server IP - Enter the IP address of the Radius Server. 
• 
Radius Port -
 
Enter the port that radius service used.
 
• 
Radius Password - Enter the password for the Radius Server. 
¾
 
WPA-PSK/ WPA2-PSK - Select WPA based on pre-shared passphrase.
 
• 
Version - You can select one of following versions
 
1)
 
Automatic -
 
Select WPA-PSK or WPA2-PSK automatically based on the wireless 
station's capability and request. 
 
2)
 
WPA-PSK -
 
Pre-shared key of WPA.
  
3)
 
WPA2-PSK -
 
Pre-shared key of WPA2. 
 
• 
PSK Passphrase - You can enter a passphrase between 8 and 63 characters long.
 
• 
Group Key Update Period - Specifiy the group key update interval in seconds. The 
value can be either 0 or at least 30. Enter 0 to disable the update.
 
Be sure to click the Save button to save your settings on this page. 
)
 
Note: 
The AP will reboot automatically after you click the Save button if you have select the Reboot 
checkbox. 
3.4.4  MAC Filtering 
The Wireless MAC Filtering for wireless networks are set on this page, Figure 3-12: