TP-Link Technologies Co. Ltd. WA60XG Manuale Utente
TL-WA601G
108M Wireless Access Point User Guide
27
Figure 3-21 Firmware Upgrade
New firmware versions are posted at
and can be downloaded for free. If the AP
is not experiencing difficulties, there is no need to download a more recent firmware version,
unless that version has a new feature that you want to use.
unless that version has a new feature that you want to use.
)
Note:
When you upgrade the AP's firmware, you may lose its configuration settings, so make sure you
write down the AP settings before you upgrade its firmware.
write down the AP settings before you upgrade its firmware.
To upgrade the AP's firmware, follow these instructions:
1. Download a more recent firmware upgrade file from the TP-LINK website (
).
2. Run a TFTP Server on a PC on your LAN, and take the file in the TFTP server’s path.
3. Type the downloaded file name into the File Name box.
4. Type the IP Address of the PC that runs the TFTP server in the TFTP Server’s IP Address
3. Type the downloaded file name into the File Name box.
4. Type the IP Address of the PC that runs the TFTP server in the TFTP Server’s IP Address
field.
5. Click
the
Upgrade button.
¾
Firmware Version - displays the current firmware version.
¾
Hardware Version - displays the current hardware version. The hardware version of the
upgrade file must accord with the current hardware version.
upgrade file must accord with the current hardware version.
)
Note:
Do not turn off the AP or press the Reset button while the firmware is being upgraded.
The AP will reboot after the Upgrading has been finished.
The AP will reboot after the Upgrading has been finished.
3.7.2 Factory Defaults
This page (shown in Figure 3-22) allows you to restore the factory default settings for the AP.