TP-Link Technologies Co. Ltd. WA60XG Manuale Utente

 

 

34

 

It takes a few seconds for the power indicator to light up. Wait a minute and check the power light 
status on the access point if the access point has no power. 

1)  Make sure the power cord is connected to the access point. 

2)  Make sure the power adapter is connected to a functioning power outlet. If it is in a 

power strip, make sure the power strip is turned on. If it is plugged directly into the wall, 
verify that it is not a switched outlet. 

3)  Make sure you are using the correct TP-LINK power adapter supplied with your access 

point. 

There is a hardware connection problem. Check these items: 

1)  Make sure the cable connectors are securely plugged in at the access point and the 

network device (hub, switch, or router). 

2)  Make sure the connected device is turned on. 

3)  Be sure the correct cable is used. Use a standard Category 5 Ethernet patch cable. If the 

network device has Auto Uplink™ (MDI/MDIX) ports, you can use either a crossover 
cable or a normal patch cable. 

There is a configuration problem. Check these items:

 

1)  You may not have restarted the computer with the wireless adapter to have TCP/IP 

changes take effect. Restart the computer. 

2)  The computer with the wireless adapter may not have the correct TCP/IP settings to 

communicate with the network. Restart the computer and check that TCP/IP is set up 
properly for that network. The usual setting for Windows the Network Properties is set to 
“Obtain an IP address automatically.” 

3)  The access point’s default values may not work with your network. Check the access 

point default configuration against the configuration of other devices in your network.