TP-Link Technologies Co. Ltd. WA860REV4 Manuale Utente
15
Chapter 3
Customize Your Network
Note:
If you have changed the wireless settings via a wireless device, you will be disconnected after the settings
are applied. Please write down the new SSID for future use.
¾
To hide the SSID of the extended network:
1. Go to
Settings
>
Wireless
>
Extended Network
.
2. Select
Hide SSID broadcast
, and the corresponding SSID will not be displayed when
wireless devices scan for local wireless networks. Devices must join the network
manually in order to connect.
manually in order to connect.
3. Click
Save
.
3. 3. Change LAN Settings
The extender is preset with a default LAN IP 192.168.0.254, with which you can log in to
the web management page. The LAN IP address, together with the Subnet Mask, also
defines the subnet that the connected devices are on. If the IP address conflicts with
another device on your local network or your network requires a specific IP subnet, you
can change it.
1. Visit
the web management page. The LAN IP address, together with the Subnet Mask, also
defines the subnet that the connected devices are on. If the IP address conflicts with
another device on your local network or your network requires a specific IP subnet, you
can change it.
1. Visit
http://tplinkrepeater.net
, and log in with the password you set for the extender.
2. Go to
Settings
>
Network
.
3. Select
Use the following IP address
.
4. Enter a new IP address as needed and leave the
Subnet Mask
as the default settings
and enter the gateway that is in the same subnet as the IP address. The gateway is
usually the LAN IP address of your extender.
usually the LAN IP address of your extender.
5. Click
Save
.