TP-Link Technologies Co. Ltd. WA860REV4 Manuale Utente
4
Chapter 1
Get to Know About Your Extender
1. 2. 1. LED Explanation
You can check the extender’s working status by following the LED Explanation table.
Name
Status
Indication
(Signal)
Green
The extender is connected to your router’s wireless network
and is in a suitable location.
Red
The extender is experiencing poor signal strength. Try
relocating it closer to your router.
Off
No wireless connection is established.
WPS
On/Off
The light remains on for 5 minutes when a WPS connection is
established, then turns off.
Flashing
WPS connection is being established.
(Power)
On
The extender is on.
Flashing
The extender is starting up.
Off
The extender is off.
1. 2. 2. Port and Button Description
Ports or Buttons
Description
ON/OFF Button
To turn on or off the extender, press the ON/OFF button.
WPS Button
Press the WPS button on your host router, and immediately press the WPS
button on the extender. The WPS LED of the extender should change from
flashing to solid on, indicating successful WPS connection.
RESET Button
With the extender powered on, press and hold the RESET button until all the
LEDs turn on momentarily. Then release the button.
Ethernet Port
Connect your Ethernet-only device to the Ethernet port of the extender to join
the Wi-Fi network.