TP-Link Technologies Co. Ltd. WR1043NDV2 Manuale Utente
TL-WR1043ND
300Mbps Wireless N Gigabit Router
•
SSID (to be bridged) - The SSID of the AP your router is going to connect to as a client.
You can also use the search function to select the SSID to join.
You can also use the search function to select the SSID to join.
•
MAC Address (to be bridged) - The MAC Address of the AP your router is going to
connect to as a client. You can also use the survey function to select the MAC Address
to join.
connect to as a client. You can also use the survey function to select the MAC Address
to join.
•
Survey - Click this button, you can search the AP which runs in the current channel.
•
Key type - This option should be chosen according to the AP's security configuration. It
is recommended that the security type is the same as your AP's security type
is recommended that the security type is the same as your AP's security type
•
WEP Index - This option should be chosen if the key type is WEP (ASCII) or WEP
(HEX).It indicates the index of the WEP key.
(HEX).It indicates the index of the WEP key.
•
Auth Type - This option should be chosen if the key type is WEP (ASCII) or WEP
(HEX).It indicates the authorization type of the Root AP.
(HEX).It indicates the authorization type of the Root AP.
•
Password - If the AP your router is going to connect needs password, you need to fill the
password in this blank.
password in this blank.
4.6.2 Wireless Security
Choose menu “Wireless→Wireless Security”, and then you can configure the security settings
of your wireless network.
There are five wireless security modes supported by the router: WPA-Personal, WPA2-Personal,
WPA-Enterprise, WPA2-Enterprise, and WEP.
-36-