TP-Link Technologies Co. Ltd. WR1043NDV2 Manuale Utente

 

 

Figure 4-21 WEP 

• 

Type - you can choose the type for the WEP security on the drop-down list. The default 

setting is Automatic, which can select

 

 

or Open System

 

authentication type 

automatically based on the wireless station's capability and request. 

• 

 

 

Hexadecimal and

 

ASCII formats are provided here

. 

Hexadecimal 

format stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified 

length.  ASCII format stands for any combination of keyboard characters in the specified 

length.  

• 

WEP Key - Select which of the four keys will be used and enter the matching WEP key that 

you create. Make sure these values are identical on all wireless stations in your network. 

 

• 

 

- You can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for 

encryption. "Disabled" means this WEP key entry is invalid. 

 

You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is 

not promoted) or 5 ASCII characters.   

128-bit - You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is 

not promoted) or 13 ASCII characters.   

152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is 

not promoted) or 16 ASCII characters.   

)

If you do not set the key, the wireless security function is still disabled even if you have 
selected Shared Key as Authentication Type.

 

Be sure to click the Save button to save your settings on this page. 

Choose menu “Wireless→Wireless MAC Filtering”, and then you can control the wireless 
access by configuring the Wireless MAC Address Filtering function, shown in 

-39-