TP-Link Technologies Co. Ltd. WR64XGV0 Manuale Utente

 

 36

4. Click the Add New... button and enter the MAC address 00-0A-EB-00-07-BE in the MAC 

 field, enter wireless station A in the Description field, select Allow in the Privilege 

pull-down list and select Enabled in the Status pull-down list. Click the Save and the Return 

button. 

5. Click the Add New... button and enter the MAC address 00-0A-EB-00-07-5F in the MAC 

 field, enter wireless station B in the Description field, select Deny in the Privilege 

pull-down list and select Enabled in the Status pull-down list. Click the Save and the Return 

button. 

6. Click the Add New... button and enter the MAC address 00-0A-EB-00-07-8A in the MAC 

 field, enter wireless station C in the Description field, select 128-bit in the Privilege 

pull-down list, enter 2F34D20BE2E54B326C5476586A in the WEP Key field and select 

 in the Status pull-down list. Click the Save and the Return button. 

The filtering rules that configured should be similar to the following list: 

 

) 

1)  If you select the radio button Allow the stations not specified by any enabled entries in 

 for Filtering Rules, the wireless station B will still not be able to access 

the router, however, other wireless stations that are not in the list will be able to access the 

router. 

2)  If you enable the function and select the Deny the stations not specified by any enabled 

 for Filtering Rules, and there are not any enable entries in the 

list, thus, no wireless stations can access the router. 

This page shows MAC Address, Current Status, Received Packets and Sent Packets for each 

connected wireless station. 

 

Figure 5-18    The router attached wireless stations