TP-Link Technologies Co. Ltd. WR64XGV0 Manuale Utente

 

 41

virtual server must have a static or reserved IP Address because its IP Address may change 

when using the DHCP function. You can set up virtual servers on this page, shown in Figure 

5-25: 

 

Figure 5-25  Virtual Servers 

¾

  Service Port - The numbers of External Ports. You can type a service port or a range of 

service ports (the format is XXX – YYY, XXX is the start port, YYY is the end port).   

¾

  IP Address - The IP Address of the PC providing the service application. 

¾

  Protocol - The protocol used for this application, either TCP,  UDP, or All  (all protocols 

supported by the router). 

¾

  Status - The status of this entry either Enabled or Disabled. 

1. Click 

the Add New button.(pop-up Figure 5-25) 

2.  Select the service you want to use from the Common Service Port list. If the Common 

 list does not have the service that you want to use, type the number of the 

service port or service port range in the Service Port box. 

3.  Type the IP Address of the computer in the Server IP Address box.  

4.  Select the protocol used for this application, either TCP or UDP, or All. 

5. Select 

the 

 checkbox to enable the virtual server. 

6. Click 

the 

 button.   

 

Figure 5-26    Add or Modify a Virtual Server Entry