TP-Link Technologies Co. Ltd. WR64XGV0 Manuale Utente

 

 44

There are many popular applications in the Popular Application list. You can select it, and the 

application will fill in the Trigger Port,  incoming Ports Range boxes and select the Enable 

checkbox. It has the same effect as adding a new rule. 

To modify or delete an existing entry: 

1. Click 

the 

in the entry you want to modify. If you want to delete the entry, click the 

. 

2.  Modify the information.   

3. Click 

the 

 button. 

Click the Enable All button to make all entries enabled 

Click the Disabled All button to make all entries disabled. 

Click the Delete All button to delete all entries 

) 

1)  When the trigger connection is released, the according opening ports will be closed. 

2)  Each rule allowed to be used only by one host on LAN synchronously. The trigger connection 

of other hosts on LAN will be refused. 

3)  Incoming Port Range cannot overlap each other. 

The DMZ host feature allows one local host to be exposed to the Internet for a special-purpose 

service such as Internet gaming or videoconferencing. DMZ host forwards all the ports at the 

same time. Any PC whose port is being forwarded must have its DHCP client function disabled 

and should have a new static IP Address assigned to it because its IP Address may change when 

using the DHCP function. You can set up DMZ host on this page shown in Figure 5-29: 

 

Figure 5-29  DMZ 

To assign a computer or server to be a DMZ server:   

1. Click 

the 

 radio button 

2.  Enter the local host IP Address in the DMZ Host IP Address field 

3. Click 

the 

 button. 

) 

After you set the DMZ host, the firewall related to the host will not work.