TP-Link Technologies Co. Ltd. WR64XGV0 Manuale Utente

 

 47

 

Figure 5-33  IP address Filtering 

To disable the IP Address Filtering feature, keep the default setting, Disabled. To set up an IP 

Address Filtering entry, click Enable Firewall and Enable IP Address Filtering on the Firewall 

page, and click the Add New… button. The page "Add or Modify an IP Address Filtering entry" 

will appear shown in Figure 5-34: 

 

Figure 5-34    Add or Modify an IP Address Filtering Entry 

To create or modify an IP Address Filtering entry, please follow these instructions: 

1.  Effective Time - Enter a range of time in HHMM format, which point to the range time for the 

entry to take effect. For example, 0803 - 1705, the entry will take effect from 08:03 to 17:05. 

2.  LAN IP Address - Enter a LAN IP Address or a range of LAN IP addresses in the field, in 

dotted-decimal notation format. For example, 192.168.1.20 - 192.168.1.30. Keep the field 

open, which means all LAN IP Addresses have been put into the field.   

3.  LAN Port -Enter a LAN Port or a range of LAN ports in the field. For example, 1030 - 2000. 

Keep the field open, which means all LAN ports have been put into the field.   

4.  WAN IP Address - Enter a WAN IP Address or a range of WAN IP Addresses in the field, in