TP-Link Technologies Co. Ltd. WR841NV13 Manuale Utente
29
Chapter 4
Configure
•
Key type
- This option should be chosen according to the AP’s security configuration.
It is recommended that the security type is the same as your AP’s security type.
•
WEP Index
- This option should be chosen if the key type is WEP (ASCII) or WEP (HEX).
It indicates the index of the WEP key.
•
Auth Type
- This option should be chosen if the key type is WEP (ASCII) or WEP (HEX).
It indicates the authorization type of the Root AP.
•
Password
- If the AP your router is going to connect needs password, you need to fill
the password in this blank.
4. 4. 2. Wireless Security
1. Visit
http://tplinkwifi.net
, and log in with the username and password you set for
the router.
2. Go to
Wireless
>
Wireless Security
.
3. Configure the the security settings of your wireless network and click
Save
.
•
Disable Security
- The wireless security function can be enabled or disabled. If
disabled, wireless clients can connect to the router without a password. It’s strongly
recommended to choose one of the following modes to enable security.
recommended to choose one of the following modes to enable security.
•
WPA-PSK/WPA2-Personal
- It’s the WPA/WPA2 authentication type based on pre-
shared passphrase.