TP-Link Technologies Co. Ltd. WR841NV13 Manuale Utente

33

Chapter 4

Configure

DTIM Interval value. You can specify the value between 1-255 Beacon Intervals. The 
default value is 1, which indicates the DTIM Interval is the same as Beacon Interval. 

• 

Enable WMM

 - WMM function can guarantee the packets with high-priority messages 

being transmitted preferentially. It is strongly recommended to enable this function. 

• 

Enable Short GI

 - It is recommended to enable this function, for it will increase the 

data capacity by reducing the guard interval time. 

• 

Enable AP Isolation

 - This function isolates all connected wireless stations so that 

wireless stations cannot access each other through WLAN. This function will be 
disabled if WDS / Bridge is enabled.

1.  Visit 

http://tplinkwifi.net

, and log in with the username and password you set for 

the router.

2.  Go to 

Wireless

 > 

Wireless Statistics

 to check the data packets sent and received by 

each client device connected to the router.

• 

MAC Address

 - The MAC address of the connected wireless client.

• 

Current Status

 - The running status of the connected wireless client.

• 

Received Packets

 - Packets received by the wireless client.

• 

Sent Packets

 - Packets sent by the wireless client.

• 

Configure

 - The button is used for loading the item to the Wireless MAC Filtering list.

• 

Allow

 - If the Wireless MAC Filtering function is enabled, click this button to 

allow the client to access your network.

• 

Deny

 - If the Wireless MAC Filtering function is enabled, click this button to 

deny the client to access your network.

Guest Network allows you to provide Wi-Fi access for guests without disclosing your 
host network. When you have guests in your house, apartment, or workplace, you can 
create a guest network for them. In addition, you can customize guest network settings 
to ensure network security and privacy.