TP-Link Technologies Co. Ltd. WR841NV13 Manuale Utente

73

The default wireless password is printed on the label of the router. If the password has 
been altered, please connect your computer to the router using an Ethernet cable and 
follow the steps below: 
1. Visit

 http://tplinkwifi.net

, and log in with the username and password you set for the 

router.

2. Go to 

Wireless 

> 

Wireless Security

 to retrieve or reset your wireless password.

The default username and password of the web management page are 

admin

 (in 

lowercase). 
If you have altered the username and password but Password Recovery is disabled:
1. Reset the router to factory default settings: press and hold the Reset button for about 

7 seconds and then release;

2. Visit 

http://tplinkwifi.net

, and enter 

admin 

(in lowercase) as both username and 

password to login. 

Note: You’ll need to reconfigure the router to surf the Internet once the router is reset, and please mark down your 

new password for future use.

1. This can happen for a variety of reasons. Please try the methods below to login again.
•  Make sure your computerthe has connected to the router correctly and the 

corresponding LED light up.

•  Make sure the IP address of your computer is configured as 

Obtain an IP address 

automatically

 and 

Obtain DNS server address automatically

.

2. Make sure  you enter the correct IP address to login: 

http://tplinkwifi.net

.

•  Check your computer’s settings:
3. Go to 

Start 

> 

Control Panel

 > 

Network and Internet

, and click 

View network status 

and tasks

.

1 )  Click 

Internet Options

 on the bottom left.

2 )  Click 

Connections

 and select 

Never dial a connection

.