TP-Link Technologies Co. Ltd. WR841NXV9 Manuale Utente
300Mbps Wireless N Router
TL-WR841N/TL-WR841ND
-52-
Applications do not have the application you need, enter the Trigger Port and the
Incoming Ports manually.
Incoming Ports manually.
3. Select the protocol used for Trigger Port from the Trigger Protocol drop-down list, either
TCP, UDP, or All.
4. Select the protocol used for Incoming Ports from the Incoming Protocol drop-down list,
either TCP or UDP, or All.
5. Select
Enable in Status field.
6. Click
the
Save button to save the new rule.
Figure 4-34 Add or Modify a Triggering Entry
To modify or delete an existing entry:
1. Click
the
Modify in the entry you want to modify. If you want to delete the entry, click the
Delete.
2. Modify the information.
3. Click
the
Save button.
Click the Enable All button to make all entries enabled
Click the Disabled All button to make all entries disabled.
Click the Delete All button to delete all entries
)
Note:
1. When the trigger connection is released, the according opening ports will be closed.
2. Each rule allowed to be used only by one host on LAN synchronously. The trigger connection
of other hosts on LAN will be refused.
3. Incoming Port Range cannot overlap each other.